Time To Choose The Best Finish For Your Floors After Sanding

The demand for hardwood floors is always quite high. The beautiful grains, natural colour and imperfect marks add a touch of character and uniqueness to the floor. Unlike carpets, you don’t have to replace hardwood floors after every few years. If you ever notice any scratch or unsightly mark, get in touch with a company offering professional floor sanding services.

Sanded floors will add warmth and sophistication to your home. Floor sanding specialists know how to get rid of major and minor dents, scratches and stains. As far as the floor finishes are concerned, you can either choose water-based varnish or oil-based varnish.

6 Steps To Follow When Using Water-Based Varnish

1. After you have completed sanding the floor, vacuum and wipe it to remove the wood dust.

2. Use semi-solid silicon to fill the gaps between the wood planks. Clean the surface by scrubbing off the excess silicon.

3. Once the floor has become dry and clean, apply epoxy. It is a water-based primer which removes wood sap and stains.

4. Apply a layer of polyurethane or other water-based varnish and allow it to dry completely.

5. Apply another coat of varnish after the floor has dried and leave it for a few hours.

6. Apply a final layer of varnish to finish the process of floor sanding in Croydon.

Why People In Croydon Prefer Oil-Based Varnish?

One of the primary reasons why experienced companies like PJ Pine & Son recommend using oil-based varnish is because they have better protective properties. They keep the wood protected and prevent floor damage. Oil-based varnishes are difficult to scratch and the wooden floors can look new for years to come. The only disadvantage is that the oil-based floor varnishing process is arduous and more time-consuming.

5 Steps To Follow When Using Oil-Based Varnish

1. After you have completed sanding the floor, vacuum and wipe it to remove the wood dust.

2. Use wall putty to fill the gaps between the wood planks. Clean the surface by scrubbing off the excess putty.

3. Once the floor has become dry and clean, apply an oil-based primer. If you are using polyurethane, check whether the product is oil-based.

4. It takes around 4 to 6 hours for oil-based varnishes to fully dry.

5. Sand the floor lightly before applying the final coat and leave it for another 6 hours.

It’s time you choose the best finish for your floors and hire floor sanding experts.